* NOTE: If you choose Only_HAT item, it is not including Raspberry Pi .


Setting guide

https://www.bi7jta.org/wiki/

FM Analog feature need to install Pi-Star patch IMG and flash FM firmware, see the segment 1.3.9

More: http://mmdvm.bi7jta.org/search/label/MMDVM_repeater

Youtube demo

https://youtu.be/8d3_6B9SFgA


Build up with higher performance components

STM32F446,

FOX924B 12MHz TCXO,

DB9 interface,

4PIN header for Nextion .

With DB9 cable (option 0.5/0.75/1.0/1.5 Meter)





For DR-1X Yaesu






With GM300/M120


With GM338/CDM1250



FC302 Data radio



V3F4 Definition

1, Radio Data

Transmitter radio
TXA
PTT
GND

Receiver radio
RXA
RSSI
GND

Extend
HB heartbeat

Cancel
COS

2, Nextion
5V <-> HAT 5V
RXD <-> HAT TX
TXD <-> HAT RX
GND <-> HAT G

3, OLED
V3F4 Cancel OLED interface, please follow Raspberry GPIO definition, and jump line yourself.
http://mmdvm.bi7jta.org/search/label/Definition_GPIO_PCB_Case

4, Potentiometer ( High-precision )
RX : Adjust RX level
RV2: Secondary adjustment, suggest keep default
TX : Adjust TX level
RSSI: extend

5, External LED
J7 : Connect external led
J8 : Open,GND for external LED


Features:

Repeater and Simplex mode change anytime , through change the RX/TX board line order.
Support MMDVM mode DMR/YSF/P25/NXDN/DSTAR/POCSAG
Double timeslot in DMR mode, act as a mini Digital voice repeater.
Support VHF/UFH, frequency range:  depends on your external radio.
High-quality Fox924B 12MHz TCXO, stable with low BER.
Support Raspberry Pi 3B, 3B+, Pi ZERO, Compatible with NanoPi NEO, Orange Pi, Compatible to BlueDV(Required to add USBtoTTL or Bluetooth model)
With USB interface ,can connect to Raspberry Pi and PC, inner PL2303 model.
Upgrade through ST-Link, USB, GPIO, continue upgrade support.

Including && components
1x PCB with complete soldering,
1x External radio connector cable
1x Motorola Linker,(suit to GM300/M120/GM338/GM3188/CDM1250/GM340/GM950/FT-7800/FT-8900 etc)
 

Specs and Docs:
Power require: 5V2A
MCU: STM32F446x
TCXO: 12.0MHz ,FOX924
HAT: 1.6mm thick,unleaded process
Interface: MicroUSB, GPIO, DB9 female, 6 PinOut
 
 
After sales and support: bi7jta@gmail.com

 

PAYMENT : Paypal offline

SHIPPING:  Postal register or Express

Write a review

Note: HTML is not translated!
    Bad           Good

Repeater board V3F4 with Cable

  • Brands NANO-Wireless
  • Product Code: Repeater_Kit_MMDVM
  • Availability: In Stock
  • $59.00


Available Options


Related Products

Shipping DHL/Postal/EMS Channel

Shipping DHL/Postal/EMS Channel

We support different shipping channels, 1)DHL Express, about 5 mor more days (Suggest)South Asia in..

$0.00

Pager for POCSAG mode

Pager for POCSAG mode

Features:PLL or crystal, 137-199 MHz and 400-499 MHz, POCSAG.Please notice that the frequency you us..

$63.00

Acrylic "L" Case for Nextion 3.2',4.3'

Acrylic "L" Case for Nextion 3.2',4.3'

Customize for MMDVM, design by BI7JTA.including:1x Acrylic "L" Case for Nextion 3.2' or for 4.3'4x M..

$0.00

Duplex Model_B: Alloy_SPOT_O

Duplex Model_B: Alloy_SPOT_O

Desc:Duplex Model_B: Alloy_SPOT_O including:1x Duplex hotspot board with ANTs1x Duplex HAT, Case Int..

$130.00

Duplex Model_A : ALC_SPOT_NX

Duplex Model_A : ALC_SPOT_NX

Name: Acrylic "L" Case Duplex hotSPOT for Nextion Duplex Model_A1 : ALC_SPOT_NX32 including: 1x Dupl..

$165.00

Duplexer for repeater

Duplexer for repeater

Temporary out of stock, if need please email to bi7jta@gmail.com or send message directly .Features:..

$0.00

Repeater Model_A:  ALC_RPT_NX_V3

Repeater Model_A: ALC_RPT_NX_V3

Name: Acrylic "L" Case Repeater Kit for NextionDemo in Youtube    https://www.youtube.com/..

$165.00

Repeater Model_D:  3B_RPTHost for V3F4  with fan

Repeater Model_D: 3B_RPTHost for V3F4 with fan

Setting guide More: http://mmdvm.bi7jta.org/search/label/MMDVM_repeaterhttps://www.bi7jta.org/wiki/1..

$122.00

Wrist Watch Pager

Wrist Watch Pager

Features:PLL or crystal, 137-199 MHz and 400-499 MHz, POCSAG.Please notice that the frequency you us..

$63.00